Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version Wicher 500i rev.2c turbo card *New Version

Wicher 500i rev.2c turbo card *New Version

$121.95

Wicher 500i rev.2c turbo card *newest version 

Wicher 500i rev.2c turbo card has been designed for installation inside Amiga A500/A500+ computer. It supports 68000/68010 CPUs (using PLCC68 package), up to 12 MB of Fast RAM (using 16-128MB standard SIMM72 memory modules) and 44 Pin IDE hard drives. CPU clock speed can be set up to 50 MHz.

 

*Download WicherInstaller Info including the PDF can be found at: Retro-7bit

Options at check out:

1. CPU

2. Memory 2 options

3. Drive Options (DOM & IDE to CF adaptor with 2" cable)

Features

  • AmigaA500/A500+ compatibility (in place of the original CPU),
  • PLCC68-packaged MC68000, MC68HC000, MC68010 chip support,
  • recommended chip version: MC68HC000 (not included),
  • recommended Kickstart version: Kickstart 3.1,
  • supported CPU clock speeds: 7,12,14,16,25,28,33,42,50 MHz,
  • RAM expansion: industry standard SIMM72 (FPM/EDO) 1-8MB or 16-128MB, 50/60ns memory modules (not included),
  • up to 12 MB FAST RAM,
  • Amiga A600-compatible IDE controller,
  • SPI controller

 

 

Benchmarks

  • Amiga 500 (Custom Kickstart 3.1, MC68HC000FN16 CPU running @50MHz, scsi.device V46.0, MAPROM function enabled)
  • MIPS: ~4.53
  • Dhrystones: ~4341
  • IDE transfer speeds: ~6.3MB/s (using IdeFix97 ~6.7MB/s)
  • RAM transfer speeds: ~7.02MB/s

The above results have been achieved with SysInfo 4.0, AIBB 6.5

  

 

Software

The provided software facilitates user-inititated configuration changes via CLI command or additional WicherBootMenu module, allowing creation of custom Kickstart versions (with Remus program). WicherBootMenu can be accessed by holding down the left mouse button when turning on or rebooting your Amiga.

 

Wicher list of options 
VERSION - display version information 
STATUS - display actual Wicher config 
LOAD - load config from a file 
SAVE - save config to a file 
CLK - change CPU clock speed 
FASTMEM - (on/off) enables/disables FAST RAM 
CFGRAM - automatic configuration of memory controller 
IDE - (on/off) enables/disables IDE controller 
SPI - (on/off) enables/disables SPI controller 
RAS13 - (on/off) enables/disables support for additional memory banks in the SIMM module (two-sided modules). 
BIGRAM - (on/off) enables/disables support for SIMM module 16MB-128MB
SLOWRAM - (on/off) enables/disables support Trapdoor RAM - 1.5 MB ($C00000)
OTHERRAM - (on/off) enables/disables support other ram - 1.5 MB ($A00000)
KICKRAM - (on/off) enables/disables support memory - 1 MB ($E00000 i $F00000)

Example: wicher clk=28 RAS13=on

 

Full Description
Qty
  • Description

    Wicher 500i rev.2c turbo card *newest version 

    Wicher 500i rev.2c turbo card has been designed for installation inside Amiga A500/A500+ computer. It supports 68000/68010 CPUs (using PLCC68 package), up to 12 MB of Fast RAM (using 16-128MB standard SIMM72 memory modules) and 44 Pin IDE hard drives. CPU clock speed can be set up to 50 MHz.

     

    *Download WicherInstaller Info including the PDF can be found at: Retro-7bit

    Options at check out:

    1. CPU

    2. Memory 2 options

    3. Drive Options (DOM & IDE to CF adaptor with 2" cable)

    Features

    • AmigaA500/A500+ compatibility (in place of the original CPU),
    • PLCC68-packaged MC68000, MC68HC000, MC68010 chip support,
    • recommended chip version: MC68HC000 (not included),
    • recommended Kickstart version: Kickstart 3.1,
    • supported CPU clock speeds: 7,12,14,16,25,28,33,42,50 MHz,
    • RAM expansion: industry standard SIMM72 (FPM/EDO) 1-8MB or 16-128MB, 50/60ns memory modules (not included),
    • up to 12 MB FAST RAM,
    • Amiga A600-compatible IDE controller,
    • SPI controller

     

     

    Benchmarks

    • Amiga 500 (Custom Kickstart 3.1, MC68HC000FN16 CPU running @50MHz, scsi.device V46.0, MAPROM function enabled)
    • MIPS: ~4.53
    • Dhrystones: ~4341
    • IDE transfer speeds: ~6.3MB/s (using IdeFix97 ~6.7MB/s)
    • RAM transfer speeds: ~7.02MB/s

    The above results have been achieved with SysInfo 4.0, AIBB 6.5

      

     

    Software

    The provided software facilitates user-inititated configuration changes via CLI command or additional WicherBootMenu module, allowing creation of custom Kickstart versions (with Remus program). WicherBootMenu can be accessed by holding down the left mouse button when turning on or rebooting your Amiga.

     

    Wicher list of options 
    VERSION - display version information 
    STATUS - display actual Wicher config 
    LOAD - load config from a file 
    SAVE - save config to a file 
    CLK - change CPU clock speed 
    FASTMEM - (on/off) enables/disables FAST RAM 
    CFGRAM - automatic configuration of memory controller 
    IDE - (on/off) enables/disables IDE controller 
    SPI - (on/off) enables/disables SPI controller 
    RAS13 - (on/off) enables/disables support for additional memory banks in the SIMM module (two-sided modules). 
    BIGRAM - (on/off) enables/disables support for SIMM module 16MB-128MB
    SLOWRAM - (on/off) enables/disables support Trapdoor RAM - 1.5 MB ($C00000)
    OTHERRAM - (on/off) enables/disables support other ram - 1.5 MB ($A00000)
    KICKRAM - (on/off) enables/disables support memory - 1 MB ($E00000 i $F00000)

    Example: wicher clk=28 RAS13=on

     

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: 0A113
    Width: 6.00 (in)
    Height: 8.00 (in)
    Depth: 2.00 (in)