Wireless USB mouse adapter Wireless USB mouse adapter Wireless USB mouse adapter Wireless USB mouse adapter

Wireless USB mouse adapter

$23.00

USB wireless mouse adapter for AMIGA/ATARI ST

Based on open source Smally Mouse ( https://github.com/simoninns/SmallyMouse2)

 

 

 

 

 

Device may work in two modes: 

  • AMIGA ( switch up )
  • ATARI ST ( switch down)

 

smousejpr.png

 

 

DISCLAIMER:

  • i have noticed, in some upgraded amigas 5V line on joysitck port need small mod, to deliver more juice to the port.
  • device may not work with wired mouses, that needs to much current, so preferably use wireless ones

 

 

AMIGA600 MOD

 

ami-mod.png

 

 

 

Amiga1200 MOD

 

  

 

 

amiga1200.jpg

 

 

 

UPLOADING FIRMWARE:

  • get usb A-A cable
  • Download driver pack ( in win10 i had to disable driver signature enforcement) 
  • Set 2 dip switches to ON posistion
  • Connect to PC and move dip switch 1 to OFF position; windows will detect hardware
  • install driver (accept RED WARNING BOX)
  • You shall have sth like this:

 

 

 

 

  • Download and install  software FLIP
  • in FLIP:
    • DEVICE -> SELECT -> AT90USB1287
    • SETTINGS -> COMMUNICATION --> USB --> OPEN
    • You shall have sth like below:

 

 

 

 

  • FILE --> LOAD  SMALLY MOUSE FIRMWARE  and press button RUN 
  • move second  dip switches to off so BOTH ARE OFF and disconnect
  • READY

 

PS. ORDER OF STEPS IS IMPORTANT 

 

Full Description
Qty
  • Description

    USB wireless mouse adapter for AMIGA/ATARI ST

    Based on open source Smally Mouse ( https://github.com/simoninns/SmallyMouse2)

     

     

     

     

     

    Device may work in two modes: 

    • AMIGA ( switch up )
    • ATARI ST ( switch down)

     

    smousejpr.png

     

     

    DISCLAIMER:

    • i have noticed, in some upgraded amigas 5V line on joysitck port need small mod, to deliver more juice to the port.
    • device may not work with wired mouses, that needs to much current, so preferably use wireless ones

     

     

    AMIGA600 MOD

     

    ami-mod.png

     

     

     

    Amiga1200 MOD

     

      

     

     

    amiga1200.jpg

     

     

     

    UPLOADING FIRMWARE:

    • get usb A-A cable
    • Download driver pack ( in win10 i had to disable driver signature enforcement) 
    • Set 2 dip switches to ON posistion
    • Connect to PC and move dip switch 1 to OFF position; windows will detect hardware
    • install driver (accept RED WARNING BOX)
    • You shall have sth like this:

     

     

     

     

    • Download and install  software FLIP
    • in FLIP:
      • DEVICE -> SELECT -> AT90USB1287
      • SETTINGS -> COMMUNICATION --> USB --> OPEN
      • You shall have sth like below:

     

     

     

     

    • FILE --> LOAD  SMALLY MOUSE FIRMWARE  and press button RUN 
    • move second  dip switches to off so BOTH ARE OFF and disconnect
    • READY

     

    PS. ORDER OF STEPS IS IMPORTANT 

     

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: A0170
    Width: 4.50 (in)
    Height: 2.00 (in)
    Depth: 4.50 (in)